Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the bonnet and trunk of the BMW Mini

Model: Mini Mini Countryman2, F60 - Years 2017-2023
Part: Body

To open the bonnet of a Mini it is necessary to open the door on the driver's side, sit in the driver's seat and locate the lever located at the bottom under the dashboard on the left near the door itself. Pull it towards you twice consecutively, at that point, get out of the passenger compartment, stand in front of the car and lift the bonnet with your hands up to the maximum height. To open only the rear hatch with the remote control key, press the central button on the key and hold it down for a few seconds, after which the rear hatch will be unlocked and it will be possible to open it by lifting it with your hands.

Posted on 22 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to open the bonnet and trunk of the Mini One
How to open the bonnet and trunk of the Mini One
Mini (2007-2014 / R57, R55, R56) To open the bonnet of the Mini Cooper you have to go inside the car in the driver's seat, go to the area of the mats and on the left plastic there is…
How to open the trunk of the Mini Countryman from the inside
How to open the trunk of the Mini Countryman from the inside
Mini (2010-2016 / R60, Countryman1) Today we will explain how to open the trunk of the Mini Countryman from the inside. We fold down the rear seats of the vehicle and reach the central …
How to open the hood of the Mini One
How to open the hood of the Mini One
Mini (2001-2007 / R52, R50, R53) To open the hood of the Mini One you do not have to look in the lower left part of the steering wheel or in the lower part of the steering wheel. To …

Other guides you may be interested in

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos