Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on the Mini One F56

Model: Mini Mini F55, F54, F56, F57 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fuse box

See other generations:
Video tutorial

In this video, you will learn how to replace the brake pads on the Mini One F56. First, lift the car on a ramp and remove all four wheels. Next, using an 18 mm socket, undo the two nuts that secure the caliper and the front brake pads.

Then, do the same for the rear calipers and pads, this time using a 16 mm socket. Check the wear on both pads and remove them from the caliper.

Remove the bleed cap and free the sensor cable from the pads. At this point, open the brake pad kit containing the new parts and proceed with the installation by reversing the operation.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

Replacing the Rear Brake Pads on the Mini Cooper One
Replacing the Rear Brake Pads on the Mini Cooper One
Mini (2014-2023 / F55, F54, F56, F57) In today's tutorial, you will learn how to remove and replace the rear brake pads on the Mini Cooper One F55 in simple and quick steps. First, lift t…
Replacing the Front Brake Pads of the Mini Cooper
Replacing the Front Brake Pads of the Mini Cooper
Mini (2014-2023 / F55, F54, F56, F57) In this video tutorial, follow the steps to remove and replace the front brake pads of the Mini Cooper in simple and quick steps. First, raise the ve…
How to replace the brake pads on a Mini Cooper?
How to replace the brake pads on a Mini Cooper?
Mini (2014-2023 / F55, F54, F56, F57) The procedure for replacing the brake pads on a Mini Cooper is the same for both front and rear wheels: first, lift the car so that the corresponding…

    Frequently Asked Questions

    • Mini 2001-2007 - Where is the fuel pump fuse on a Mini Cooper? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos