Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in your Mini Cooper key

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Key

To replace the button cell battery located inside the remote control of your Mini Cooper, just follow the instructions in our new guide. First of all, you have to pull the upper part of the cover outwards so as to be able to completely remove the physical emergency key. Then disassemble the upper part of the cover and remove the protective cap located immediately below. At this point all that remains is to replace the old exhausted battery with the new one. Finally, reassemble the various components previously removed and you have successfully completed the procedure.

Posted on 23 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of a Mini Cooper key?
How to replace the battery of a Mini Cooper key?
Mini (2007-2014 / R56, R57, R55) Good morning, today's goal is to replace the battery of our Mini Cooper key. Let's start by unhooking and removing the back cover of the key, leverag…
How to replace the battery of the Mini Cooper key
How to replace the battery of the Mini Cooper key
Mini (2001-2007 / R52, R50, R53) When the battery of the key of the Mini Cooper model r50 is low, problems related to the opening and closing of the vehicle start to occur, in newer …
…

Other guides you may be interested in

How to Replace the Oil Sump on a Ford Focus

Follow these steps to remove and replace the oil sump on a Ford Focus engine. Lift the car on a column lift and (at your preferred height) use a socket wrench to unscrew the sump plug, allowing the oil to drain into a container (for disposal) and then re-screw the plug. Remove all the side plastics protecting the undercarriage using a battery or manual drill, then unscrew the fastening bolts around the perimeter of the oil sump. After removing the bolts from the sump, detach it from the engine block along with the gasket using a screwdriver as leverage. Clean everything and refit the new part.

Watch the video!


by ScegliAuto

More videos