Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Mini Countryman remote control.

Model: Mini Mini F60, Countryman2 - Years 2017-2023
Part: Key

In today's video, we will see how to replace the battery of the Mini Countryman remote control. This tutorial also applies to other contemporary models of the English brand, as they are equipped with the same device. The correct battery can be purchased at major physical stores or alternatively in online stores; specifically, it is a CR 2032 3-volt battery. First, we detach the rear cover. Then, we extract the metal spade. With the help of a screwdriver, we detach the internal cover that conceals the battery itself. We replace it with the new unit and test its functionality.

Posted on 5 August 2023 by ScegliAuto

This video is currently unavailable

Related tutorials

How to open the Mini Countryman with the remote control key.
How to open the Mini Countryman with the remote control key.
Mini (2017-2023 / F60, Countryman2) These short and simple instructions will show us how to open the doors of the Mini Countryman in case of an emergency or when the remote control batt…
How to replace the battery of a Mini Countryman key
How to replace the battery of a Mini Countryman key
Mini (2010-2016 / R60, Countryman1) Replacing the battery of the remote key of the Mini Countryman is very simple. It is possible to perform this operation independently and in a few mi…
How to replace the remote control battery of the Mini Countryman?
How to replace the remote control battery of the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) In this video we can see how to replace the remote control battery of the Mini Countryman, a very simple and fast operation. The replacement battery …

How to Replace the Boot Compartment Light Bulb on a Peugeot 208

If you want to improve visibility inside the boot compartment, it is recommended to replace the original incandescent bulb with a LED type (T10 fitting); once the rear hatch is opened, locate the bulb holder positioned on the side, near the shock absorber dome, where the plastic grille is located. Then, lever the retaining tab to extract the bulb holder, disconnect the power connector, and remove the old bulb to replace it with the LED one; reconnect the power, check the correct operation of the bulb (if not, rotate it 180°), and reposition the bulb holder in its place.

Watch the video!


by ScegliAuto

More videos