Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the key from the Mini Cooper remote control.

Model: Mini Mini F57, F56, F55, F54 - Years 2014-2023
Part: Key

In this short and simple guide, we will see how to remove the physical key from the Mini Cooper remote control. The physical key could be useful to us in case the battery is drained and we cannot open the doors with the remote control. So, let's pull the key out of the remote control to extract it. At this point, we remove the cap of the lock cylinder, which we find on the driver's side handle; we manually open the car to access it. Then, we replace the remote control battery to restore its normal functioning.

Posted on 3 December 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Mini Cooper key remote control
How to replace the battery of the Mini Cooper key remote control
Mini (2007-2014 / R56, R57, R55) In this short guide we will see the information regarding the disassembly and replacement of the battery of the Mini Cooper key remote. First, take o…
How do you open the Mini Cooper remote?
How do you open the Mini Cooper remote?
Mini (2010-2016 / Countryman1, R60) To be able to open the Mini Cooper remote control, you must go and press the button located at the top of the device, so that the key can be removed …
Replacement of the Mini Cooper remote control battery
Replacement of the Mini Cooper remote control battery
Mini (2014-2023 / F57, F56, F55, F54) Today's guide will show us how to disassemble and replace the battery of the Mini Cooper key remote, following the instructions below. First, we take…

Other guides you may be interested in

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos