|
Do it yourself
| |||
| ||||
How to Install a Compact Bike Rack on a Mini Countryman
Model: Mini Mini
R60, Countryman1
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
In this video, see how to install a compact bike rack for a Mini Countryman: It is necessary to have already fitted the tow bar, which in the UK must be installed by a workshop that issues a declaration of correct installation (there is no longer a need to have the vehicle tested at the MTCTC). No special tools are required for installation; open the bike rack and remove the fixing arms, then mount them onto the support clip. Unlock the tightening lever and rotate it upwards. It is ready for mounting; you can lift the bike rack and push the support horizontally over the ball head, aligning it parallel to the bumper and lowering the tightening lever until it clicks into place, then lock it. Insert the plug into the bike rack and close it by rotating it 90°, then check that all lights are functioning; in some countries, it is necessary to fit a repeater number plate (also in the UK).
Updated on 6 September 2026 by ScegliAuto
Related tutorials
Mini
(2010-2016 /
R60, Countryman1)
Before starting, open the front bonnet of your Mini Countryman. Begin by unscrewing and removing the screws that secure the battery cover, then uncli…
Mini
(2010-2016 /
R60, Countryman1)
In this tutorial we can see how to disassemble the door panel in the Mini Countryman, an extremely simple and fast operation. First of all, we open t…
Mini
(2010-2016 /
R60, Countryman1)
Before you start, open the tailgate of your Mini Countryman. Begin by unclipping and removing the inner side cover of the boot, then unclip the clips…
Other guides you may be interested in |
Frequently Asked QuestionsHow to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
