Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the TPMS sensors of the Mitsubishi Outlander

Model: Mitsubishi Outlander MK 4 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

The main institutions mentioned in this guide will show us how to program the TPMS sensors of the Mitsubishi Outlander; before performing the calibration, it is necessary for all four tires to be at the operating pressure. So let's connect our programming tool to the OBD port of the vehicle, then approach the tire pressure sensors to detect their values; in this way we will perform the programming, associating the actual tire pressure.

The TPMS warning will then be automatically reset on the instrument panel.


Posted on 27 October 2025 by ScegliAuto


Related tutorials

Overinflated Tyres Can Also Cause Problems for the TPMS on the Mitsubishi Outlander
Overinflated Tyres Can Also Cause Problems for the TPMS on the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) This video shows how to check the TPMS sensors on a Mitsubishi Outlander MK3: the use of an Autel TS408 device is recommended, which can be found, fo…
How to reset the TPMS warning light in Mitsubishi Outlander
How to reset the TPMS warning light in Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) To reset the TPMS warning light in a Mitsubishi Outlander, get inside the vehicle and turn on the ignition. Use the controls on the steering wheel to…
How to Reset the TPMS Light on the Mitsubishi Outlander
How to Reset the TPMS Light on the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) The following steps will allow you to reset the tyre pressure monitoring system (TPMS) light on the Mitsubishi Outlander; before performing the reset…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos