Do it yourself
| ||||
|
Mitsubishi Outlander - Video tutorial
Model: Mitsubishi Outlander
MK 3
- Years 2013-2021 Below we will see the steps that will allow us to reset the Tire Pressure Monitoring System (TPMS) light of the Mitsubishi Outlander; before performing the reset, it is necessary to have restored the operating pressure on all four tires. So, get in the car and turn on the instrument panel; then press the button located on the right side of the instrument panel, going to the tire pressure option, as shown in the video. At this point, once the system has detected the correct pressures, it will automatically reset the TPMS!
Posted on 18 November 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |