Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the car radio of the 2017 Mitsubishi Outlander.

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car stereo

See other generations:
Video tutorial

If you want to remove the stock radio from your third-generation Mitsubishi Outlander (2017), you just need to follow the instructions in this guide. First, enter the cabin and make sure the car is turned off, then proceed to remove the protective cover located on the central dashboard.

Once you have done that, use a screwdriver to unscrew the four screws located at the corners of the radio and disconnect the electrical cable at the back to finally complete the procedure successfully.


Posted on 12 December 2025 by ScegliAuto


Related tutorials

How to Remove the Standard Radio from a Mitsubishi Outlander
How to Remove the Standard Radio from a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Here are the step-by-step instructions for removing and replacing the standard radio from a Mitsubishi Outlander. First, get inside the vehicle and s…
How to Replace the Radio in a Mitsubishi Outlander
How to Replace the Radio in a Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) In this guide, you will learn how to remove and replace the standard radio with a new multimedia system in a Mitsubishi Outlander. First, get inside …
How to Remove the Original Radio from a Mitsubishi Outlander
How to Remove the Original Radio from a Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) How to remove the original radio from a Mitsubishi Outlander? First, use a plastic lever to remove the side cover of the radio (where the air vents a…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos