Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Outlander
    4. : How to disassemble the original Mitsubishi Outlander car stereo

Mitsubishi Outlander - Video tutorial

Model: Mitsubishi Outlander MK 2 - Years 2007-2012
Part: Car stereo
Operation: How to disassemble the original Mitsubishi Outlander car stereo

How to disassemble the original car stereo of the Mitsubishi Outlander? First of all, with a plastic lever, remove the side covering of the car radio (where the air vents are) and the upper one as in the video, then, with the help of a screwdriver, we go to unscrew the tightening screws placed on the sides of the same. After unscrewing the side fastening screws of the stereo, extract the front part of the stereo from its seat, unscrew the rear part of the car radio and remove it (disconnect the various power supply terminals located in the rear part). To assemble the new stereo and the various disassembled pieces, let's go backwards.


Posted on 18 October 2023 by ScegliAuto

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos