Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Original Radio from a Mitsubishi Outlander

Model: Mitsubishi Outlander MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

How to remove the original radio from a Mitsubishi Outlander? Here’s how to proceed: Use a plastic trim tool to remove the side cover of the radio (where the air vents are) and the top cover as shown in the video. Then, using a screwdriver, unscrew the securing screws located on either side of the radio.

After unscrewing the side screws, pull the front part of the radio out of its slot and unscrew the rear piece of the radio to remove it (disconnect the various power connectors located at the back). To install the new stereo and the various removed pieces, proceed in reverse order.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Remove the Original Radio from a Mitsubishi Outlander
How to Remove the Original Radio from a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) How do you remove the original radio from a Mitsubishi Outlander? Use a plastic trim tool to remove the central covering of the radio (where the air …
How to Remove the Original Radio from a Mitsubishi Outlander
How to Remove the Original Radio from a Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) .. How to remove the original radio from a Mitsubishi Outlander? First, use a plastic lever to remove the.. …
How to Replace the Radio in a Mitsubishi Outlander
How to Replace the Radio in a Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) In this guide, you will learn how to remove and replace the standard radio with a new multimedia system in a Mitsubishi Outlander. First, get inside …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos