Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the engine fuse box located in the Mitsubishi Lancer?

Model: Mitsubishi Lancer MK 8 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuse box

See other generations:
Video tutorial

If you don't know where the fuse box containing all the fuses for your Mitsubishi Lancer is located, don't worry because you can rely on the steps described in the following guide addressed to you. First, make sure you have parked the car safely, then turn it off completely and go to the hood.

Lift it and place the safety support, then locate the fuse box located inside the engine compartment.

Finally, all you have to do is remove the cover of the box in question and identify the fuses contained inside.


Posted on 27 January 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the 2008 Mitsubishi Lancer
Where to Find the OBD Port of the 2008 Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) If you want to access the OBD port of your 2008 Mitsubishi Lancer, simply read this guide and follow the steps described. First, enter the car from t…
Where is the fuse box of the Mitsubishi Lancer?
Mitsubishi Lancer (1995-2000 / MK 7) The Mitsubishi Lancer produced from 1995 to 2003 has two fuse boxes. The first fuse box is located inside the cabin, specifically behind the driver's…
Where is the fuel filter located in the Mitsubishi Lancer EVO?
Where is the fuel filter located in the Mitsubishi Lancer EVO?
Mitsubishi Lancer (1995-2000 / MK 7) In this video, you can see where the fuel filter is located in the Mitsubishi Lancer EVO and how to proceed if you need to replace it. As shown, the …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos