Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling and Replacing Rear Bulbs on Mitsubishi L 200

Model: Mitsubishi L 200 MK 3 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tail light bulb

See other generations:
Video tutorial

Open and lower the tailgate. Unscrew the two bolts located at the sides of the affected rear lamp.

At this point, you can pull the lamp out by hand, lifting it from both sides. To free the lamp and position it as you see fit, you can disconnect the single connector related to the car, which then splits into the three connectors of the lamp (one for each bulb).

Alternatively, you can replace the affected bulb by unscrewing the connector and pulling it out along with the bulb. Then remove the old bulb and insert the new one you have purchased.

Reconnect and reassemble the lamp.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to Replace the Dashboard Bulbs in the Mitsubishi L 200
How to Replace the Dashboard Bulbs in the Mitsubishi L 200
Mitsubishi L 200 (2015-2024 / MK 3) Understand from the start that replacing a dashboard bulb in the Mitsubishi L 200 varies depending on the vehicle's production year, so it is always …
Where is the Fuse Box Located on the Mitsubishi L 200?
Where is the Fuse Box Located on the Mitsubishi L 200?
Mitsubishi L 200 (2005-2015 / MK 2) To easily locate the fuse box on your Mitsubishi L 200 (2005-2015), follow the instructions in this guide. First, go inside the cabin and reach the d…
How to Access the ECU on the Mitsubishi L 200?
How to Access the ECU on the Mitsubishi L 200?
Mitsubishi L 200 (2005-2015 / MK 2) In this guide, you will find instructions that will allow you to access the engine ECU of the Mitsubishi L 200. First, get in the vehicle on the fron…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos