Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the ECU on the Mitsubishi L 200?

Model: Mitsubishi L 200 MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Control unit

See other generations:
Video tutorial

In this guide, you will find instructions that will allow you to access the engine ECU of the Mitsubishi L 200. First, get in the vehicle on the front passenger side, and start to dismantle and remove the glove compartment and the lower plastic panel; inside, you will find the cabin fan and next to it, your engine ECU, as shown in the video.

At this point, disconnect the ECU electrically and unscrew its fastening screws if you want to remove it, replacing it with the new original one; reassemble and connect the ECU.


Posted on 5 July 2026 by ScegliAuto


Related tutorials

Where is the OBD Port on the Mitsubishi L 200?
Where is the OBD Port on the Mitsubishi L 200?
Mitsubishi L 200 (2005-2015 / MK 2) If you want to quickly locate the OBD port inside the cabin of your Nissan Mitsubishi L 200 second generation, follow the procedure described in this…
Where is the Fuse Box Located on the Mitsubishi L 200?
Where is the Fuse Box Located on the Mitsubishi L 200?
Mitsubishi L 200 (2005-2015 / MK 2) To easily locate the fuse box on your Mitsubishi L 200 (2005-2015), follow the instructions in this guide. First, go inside the cabin and reach the d…
How to Replace the Transmission Shaft Bearing on the Mitsubishi L 200?
How to Replace the Transmission Shaft Bearing on the Mitsubishi L 200?
Mitsubishi L 200 (1996-2005 / MK 1) To replace the transmission shaft bearing on the Mitsubishi L 200, access the underside of the vehicle where the shaft is located. It must be detache…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos