Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. Pajero
  6. : Replacement mirror cap on Mitsubishi Pajero

Mitsubishi Pajero - Video tutorial

Model: Mitsubishi Pajero V80, MK 4 - Years 2006-2021
Part: Outside rearview mirror
Operation: Replacement mirror cap on Mitsubishi Pajero

Before getting to the mirror cover you have to work on the door panel, removing (with the help of a plastic wedge or a flat screwdriver) the lock handle frame and unscrewing the side screw shown in the video, the one that can only be accessed by opening the door . Pull out the window control panel and remove the panel. Now remove the plastic protection placed on the front pillar, therefore in correspondence with the mirror, and unscrew the fixing bolts of the same. Remove the mirror and mount the new one, then proceed backwards for the total reassembly.


Posted on 5 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos