Do it yourself
| ||||
|
Mitsubishi Outlander - Video tutorial
Model: Mitsubishi Outlander
MK 2
- Years 2007-2012 In order to replace the Mitsubishi Outlander heating fan, the glovebox on the passenger side must be opened and the two side tie rods removed, so that the drawer flap can be removed. Now, you will be able to remove the carpet from the bottom of the drawer so that the fan is visible. This can be removed after loosening its bolts and disconnecting its connector. After the old fan has been removed, it will be possible to replace it with a new spare part and install all the parts removed previously.
Posted on 10 March 2024 by ScegliAuto
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |