Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Mitsubishi ASX?

Model: Mitsubishi Asx MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

First, ensure that the tyre pressure is correct and, if necessary, replace any worn tyres before resetting the light. Turn on the ignition (but do not start the engine!). Now press the "info" button until you reach the menu screen that allows access to the settings.

Hold down the "info" button to enter the menu and use the same button to scroll through the options until you find "(!)reset". Press and hold the "info" button again until the tyre light starts to flash. Now drive a few miles and the light will turn off automatically.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Mitsubishi ASX
How to Reset the Tyre Pressure Warning Light on the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) This guide explains the procedure to reset the tyre pressure warning light on the Mitsubishi ASX. Before performing this operation, ensure that the p…
Resetting Tyre Pressure Light on Mitsubishi ASX
Resetting Tyre Pressure Light on Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) In this video tutorial, you will learn how to reset the tyre pressure light on a Mitsubishi ASX in simple steps. Before performing the reset, ensure …
How to reset the tyre pressure warning light on the Mitsubishi ASX?
How to reset the tyre pressure warning light on the Mitsubishi ASX?
Mitsubishi Asx (2010-2023 / MK 1) To reset the tyre pressure warning light on the Mitsubishi ASX, inflate the tyres to the recommended pressure value: this value is indicated on the s…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos