Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. : Ek Space

How to Install a Navigation System in the Mitsubishi Ek Space

Model: Mitsubishi Ek Space MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Car stereo

See other generations:
Video tutorial

If you want to replace the factory radio with a navigation system, follow these steps: start by unscrewing the screws that hold the radio, then pull out the radio and disconnect the rear electrical connectors. Obtain the installation instructions for the navigation system and make the necessary wiring connections.

Identify the GPS antenna cable, which will run along the left A-pillar of the windshield (first remove the glove compartment and the plastic cover of the pillar). Then take the new navigation system, connect the rear power connectors, insert it into the housing (2 DIN), and secure it with the support screws.

Finally, reassemble the glove compartment and the plastic panel of the pillar.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Mitsubishi Ek Space (2020-2026 / MK 2) The Mitsubishi Ek Space is a kei car, a type of vehicle with very small dimensions and engine displacement, typical of the Japanese market, which enj…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos