Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Core in a Mitsubishi Colt Plus

Model: Mitsubishi Colt Plus Z30, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Heater core

Video tutorial

To replace the heater core in the Mitsubishi Colt Plus, you need to completely disassemble the dashboard: start by removing the steering wheel airbag by unscrewing the rear screws, then remove the steering wheel by loosening the central nut. Next, detach the plastic covers around the radio and climate control, which can be removed by disconnecting the connectors at the back.

Then proceed to remove the glove compartment and any remaining plastic covers to access the components inside.

This way, you can pull out the heater core by disconnecting it from the various hoses and connectors, allowing you to insert a new one.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Radiator Fan on a Mitsubishi Colt Plus?
How to Replace the Radiator Fan on a Mitsubishi Colt Plus?
Mitsubishi Colt Plus (2002-2023 / Z30, MK 1) To replace the radiator fan on a Mitsubishi Colt Plus, open the hood to access the components inside the engine bay. Once the hood is open, loosen th…
How to Replace the Cabin Air Filter in a Mitsubishi Colt
How to Replace the Cabin Air Filter in a Mitsubishi Colt
Mitsubishi Colt Plus (2002-2023 / Z30, MK 1) If you notice a decline in air quality inside your Mitsubishi Colt when you turn on the air conditioning, it means it's time to replace the cabin air…
Where to Find the Fuse Box of the Mitsubishi Colt
Where to Find the Fuse Box of the Mitsubishi Colt
Mitsubishi Colt Plus (2002-2023 / Z30, MK 1) Locating the fuse box in your Mitsubishi Colt (2003-2008) is very simple, and with the following guide, you will find it without any difficulty. Firs…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos