Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Dashboard Trim on a Mitsubishi Colt Plus

Model: Mitsubishi Colt Plus Z30, MK 1 - Years 2002-2023
Part: Dashboard

If you want to change the appearance of the center console on your Mitsubishi Colt Plus, you can find the various parts on major e-commerce platforms as well as alternative ones. Prices vary widely, and it's impossible to give a specific indication: let's say that if you stick to what the YouTuber shows, you won't spend more than $30.00 (but shipping costs should also be considered). To do this job, first, remove the old trim: these pieces are snap-fit, so you can use a plastic scraper to avoid damaging the dashboard. Then, unscrew the screws located under the cover that secure the upper dashboard cover. At this point, you can proceed with snapping in the new pieces. You can now reattach the screws and apply the upper dashboard cover again. The job is done.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the Mitsubishi Colt
Where to Find the Fuse Box of the Mitsubishi Colt
Mitsubishi Colt Plus (2002-2023 / Z30, MK 1) Locating the fuse box in your Mitsubishi Colt (2003-2008) is very simple, and with the following guide, you will find it without any difficulty. Firs…
How to Replace the Radiator Fan on a Mitsubishi Colt Plus?
How to Replace the Radiator Fan on a Mitsubishi Colt Plus?
Mitsubishi Colt Plus (2002-2023 / Z30, MK 1) To replace the radiator fan on a Mitsubishi Colt Plus, open the hood to access the components inside the engine bay. Once the hood is open, loosen th…
How to Replace the Heater Core in a Mitsubishi Colt Plus
How to Replace the Heater Core in a Mitsubishi Colt Plus
Mitsubishi Colt Plus (2002-2023 / Z30, MK 1) To replace the heater core in the Mitsubishi Colt Plus, you need to completely disassemble the dashboard: start by removing the steering wheel airbag…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos