Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light in the Mitsubishi Pajero?

Model: Mitsubishi Pajero MK 4, V80 - Years 2006-2021
Part: Service warning light

To reset the engine oil light in the Mitsubishi Pajero, start with the instrument panel off and only after having actually changed the engine oil. Locate the button on the left side of the speedometer and press it several times until the display shows the service light tab. Once here, hold the button down for about two seconds until the light starts flashing, then release it. Press it again and wait for the word "CLEAR" to appear on the display. After about three seconds, the light will be reset.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Gearbox Oil on a Mitsubishi Pajero?
How to Change the Gearbox Oil on a Mitsubishi Pajero?
Mitsubishi Pajero (1999-2006 / MK 3, V60) To change the gearbox oil on a Mitsubishi Pajero, lift the car on a ramp to access the underside. Position a container under the gearbox and loosen t…
Resetting the service light on the Mitsubishi Pajero
Resetting the service light on the Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / MK 4, V80) Below are the instructions to reset the service light for the routine maintenance of the engine oil change on the Mitsubishi Pajero. First, get into …
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / MK 3, V60) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos