Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box of the Mitsubishi Pajero

Model: Mitsubishi Pajero V20, MK 2 - Years 1991-1999
Part: Fuse box

Do you want to replace the damaged fuses in your car? Let's see where the fuse box is located in a Mitsubishi Pajero. Remove the plastic cover at the top of the dashboard (driver's side). Once the cover is removed, disconnect the damaged fuses using needle-nose pliers from the designated compartment. After this operation, insert the new fuses into the appropriate slots in the container. Close the fuse inspection box with the plastic cover removed earlier. Test the operation of the electrical components of the Pajero.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Location of Fuse Box on Mitsubishi Pajero
Location of Fuse Box on Mitsubishi Pajero
Mitsubishi Pajero (1991-1999 / V20, MK 2) Sit in the driver's seat and look down to the left: the internal fuse box on the Mitsubishi Pajero is located there, just below and to the left of th…
Where is the Fuse Box on the Mitsubishi Pajero?
Where is the Fuse Box on the Mitsubishi Pajero?
Mitsubishi Pajero (1999-2006 / MK 3, V60) In this new guide, we will discover where the fuse box is located inside your Mitsubishi Pajero (1999-2006). First, completely turn off the vehicle a…
Where is the fuse box of the Mitsubishi Pajero located?
Where is the fuse box of the Mitsubishi Pajero located?
Mitsubishi Pajero (1991-1999 / V20, MK 2) The Mitsubishi Pajero II, produced from 1991 to 1999, has two fuse boxes: - the first fuse box is located inside the engine compartment, near the bat…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos