Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Differences in Tension on the Timing Chain of a Mitsubishi Fuso Canter 4P10

Model: Mitsubishi Mitsubishi Various
Part: Timing belt

Video tutorial

In this video, observe the difference in the timing chain of a Mitsubishi Fuso Canter 4P10 in poor condition due to inadequate maintenance and improper oil, compared to one in perfect condition. In the first case, the chain tension is clearly insufficient, and touching it produces sounds you wouldn't expect from a well-tensioned timing chain.

At the bottom, you can lift it with a finger without difficulty. In the second part of the video, see how a timing chain should function perfectly: when touched, it does not move at all and produces no noise.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to Change the PCV Filter on a Mitsubishi Fuso Canter 4P10
How to Change the PCV Filter on a Mitsubishi Fuso Canter 4P10
Mitsubishi Mitsubishi Various In this video, we will see how to change the PCV filter on a Mitsubishi Fuso Canter 4P10: changing this filter every three oil changes prevents error…
How to Change the Oil and Reset the Light on a Mitsubishi Fuso
How to Change the Oil and Reset the Light on a Mitsubishi Fuso
Mitsubishi Mitsubishi Various In this guide, you will learn how to change the oil and reset the light on a Mitsubishi Fuso with a 4P10 engine: the filter is located on the left si…
Where are the fuses located on the Mitsubishi Fuso FE140?
Where are the fuses located on the Mitsubishi Fuso FE140?
Mitsubishi Mitsubishi Various The fuses on the Mitsubishi Fuso FE140 are located inside the designated fuse boxes: this vehicle model has two. The first is located inside the cabi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos