|
Do it yourself
| |||
| ||||
How to Change the Oil and Reset the Light on a Mitsubishi Fuso
Model: Mitsubishi Mitsubishi Various
In this guide, you will learn how to change the oil and reset the light on a Mitsubishi Fuso with a 4P10 engine: the filter is located on the left side of the engine, which you will warm up. You will need a 32 mm socket and a 13 mm socket for the plug. First, drain the oil from the sump into a suitable container; ensure you dispose of it at an authorised centre. You can find the filter on eBay with code 393243278325 for £19.00 including shipping, while for the plug with gasket, Auto-doc offers it with code 80 93 0180 for £2.80, but shipping costs £9.00. Change the oil filter, also replacing the O-ring, lubricating it well with new oil, then refit the new plug to the oil sump and refill with new oil. You will need approximately 6 litres of oil. Check the recommended oil type in your manual, start the engine for a few minutes, and then check the level. Now reset the maintenance interval: turn on the ignition, press the accelerator pedal for 20 seconds while pressing the brake pedal 6 times. Release both pedals, and you are done.
Updated on 21 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Mitsubishi Mitsubishi Various
Today, we will explain how to reset the oil maintenance light on a 2020 Mitsubishi Fuso. Start the reset by turning on the van's instrument cluster a…
Mitsubishi Mitsubishi Various
Regarding the work vehicle mentioned above, there is an alternative method to the electronic diagnostic tool that connects to the car to reset the Se…
Mitsubishi Mitsubishi Various
In this new mini guide, discover a method that is both simple and effective, allowing you to reset the oil change light in your Mitsubishi Space Star…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.145
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |