Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Maintenance Light on a 2020 Mitsubishi Fuso

Model: Mitsubishi Mitsubishi Various
Part: Service warning light

Today, we will explain how to reset the oil maintenance light on a 2020 Mitsubishi Fuso. Start the reset by turning on the van's instrument cluster and pressing the accelerator pedal fully down for twenty seconds. After twenty seconds, while keeping the pedal pressed, press the brake pedal six times. Finally, release both pedals and turn off the instrument cluster. Restart the cluster to check that the procedure has been completed correctly. If necessary, you can repeat the procedure.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Mitsubishi Mitsubishi Various In this guide, you will learn how to change the oil and reset the light on a Mitsubishi Fuso with a 4P10 engine: the filter is located on the left si…
Mitsubishi Mitsubishi Various In this video, observe the difference in the timing chain of a Mitsubishi Fuso Canter 4P10 in poor condition due to inadequate maintenance and improp…
Mitsubishi Mitsubishi Various In this mini guide for all Mitsubishi Fuso 2020 owners, learn how to manually change the time displayed on the dashboard. First, turn on the display,…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos