Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mitsubishi Outlander

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Mitsubishi Outlander, keep the vehicle's instrument cluster off. Press the button to the right of the odometer until the spanner symbol appears on the instrument cluster. Hold the same button until the spanner starts flashing, then release the button and press it again to display "clear" on the instrument cluster with the new mileage.

At this point, you can turn on the instrument cluster, start the engine, and check that the spanner light does not illuminate on the display.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the 2020 Mitsubishi Outlander?
How to Reset the Service Light on the 2020 Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) The service light on the Mitsubishi Outlander MK3 (produced between 2013 and 2020) can be reset very easily using a single button. Once the ignition …
How to Reset the Maintenance Light on the 2010 Mitsubishi Outlander
How to Reset the Maintenance Light on the 2010 Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) If you want to learn how to correctly perform the manual reset of the maintenance light on your 2010 Mitsubishi Outlander, simply follow the procedur…
How to Reset the Service Light on a Mitsubishi Outlander 3
How to Reset the Service Light on a Mitsubishi Outlander 3
Mitsubishi Outlander (2013-2021 / MK 3) .. In today's article, you will see how to reset the service light on a Mitsubishi Outlander 3rd generation if it stays illuminated after.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos