Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Headlight LED on a Moto Guzzi V7

Model: Moto Guzzi V7 Classic
Part: Headlight bulb

Video tutorial

Unscrew the single tiny screw located beneath the front headlamp that secures it. Pull the headlamp out without removing it completely, as the connector will still be attached. Disconnect it by pressing on the sides and pulling it out (never pull on the wires!). Now, remove the round rubber cover at the back of the headlamp, then lift the small metal clip that holds the bulb in place.

Once done, extract the old LED bulb and insert the new one. Proceed in reverse for complete reassembly.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

V7 Classic Hello! Today you will change the oil on your Moto Guzzi V7. First, position the bike on the centre stand and warm up the engine for a few minutes. Ne…
V7 Classic In today's video, you will learn how to remove the rear wheel of a Moto Guzzi V7. First, lift the bike with a stand; disconnect the rear suspension f…
V7 Classic How to replace oil and filter on a Moto Guzzi V7 Classic? Follow this guide to perform maintenance. Position the motorcycle on its original stand, an…

How to replace the air filter on a Sym VF3I?

To replace the air filter on a Sym VF3I, open the underseat compartment to access the screws and disconnect the battery connectors. The battery will then need to be removed from its housing, allowing access to the components underneath. Here, you will find the filter box cover, which should be removed by unscrewing the fastening screws. Once the old filter is removed, insert the new one into its place and secure the cover with the screws. Then, reinstall the battery and close the underseat compartment.

Watch the video!


by ScegliAuto

More videos