Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter of a Moto Guzzi V7?

Model: Moto Guzzi V7 Classic
Part: Fuel filter

Video tutorial

The fuel filter of the Moto Guzzi V7 is located inside the tank and connected to it via a plate. The plate is secured to the tank surface with several screws, which must be loosened to remove the filter itself.

Once the screws are loosened, you can slide out the plate to which the filter is connected and then replace it with a new part. The new filter must be connected to the plate and inserted back into its housing.

When the new filter is inside the tank, the plate must be reattached to its outer part by reinserting the relevant securing screws.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Air Filter Replacement on Moto Guzzi V7 3
Air Filter Replacement on Moto Guzzi V7 3
V7 Classic In this video tutorial, we will see how to disassemble and replace the air filter of a Moto Guzzi V7 3 in simple steps. Start by removing the seat of…
How to Replace the Air Filter in the Moto Guzzi V7 Classic?
How to Replace the Air Filter in the Moto Guzzi V7 Classic?
V7 Classic You can replace the air filter in the Moto Guzzi V7 Classic by loosening the screws that secure the cover located on the right side: once the cover i…
How to Replace the Engine Oil and Oil Filter of the Moto Guzzi V7
How to Replace the Engine Oil and Oil Filter of the Moto Guzzi V7
V7 Classic Follow the instructions below to replace the engine oil and oil filter while performing the routine maintenance service on the Moto Guzzi V7. First, …

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos