Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Moto Guzzi V35
Part: Wheel

To remove the front wheel of a Moto Guzzi V35, take off the plastic cap and deflate the inner tube with a pin. To unscrew the inner tube, the YouTuber created a special tool: a rod with a diameter of 4 mm, cut in the middle with a grinder. Unscrew counter-clockwise. Removing the valve will make it easier to take off the tyre. Keep the valve in a safe place! Remove the tyre from the rim. In this case, it was placed in a vice (the tyre was 25 years old, so it didn't matter if it got damaged, as it already was), while the rim was protected with a garden hose (which was a good idea). Remove the inner tube and lever off to finish taking off the old tyre. Now give it a good clean and you are ready to fit a new tyre.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Moto Guzzi V35
How to Replace the Air Filter on a Moto Guzzi V35
V35 The main instructions in this guide will show you how to remove and replace the air filter of the Moto Guzzi V35 engine. First, place the bike on a s…
Guide to Removing the Clutch from a Moto Guzzi V35
Guide to Removing the Clutch from a Moto Guzzi V35
V35 In this guide, we will cover the main instructions that will allow you to remove and replace the clutch on the Moto Guzzi V35. First, place the bike …
How to remove the front wheel of the Moto Guzzi V35
How to remove the front wheel of the Moto Guzzi V35
V35 In this guide, we will see the instructions that will allow us to disassemble and remove the front wheel of the Moto Guzzi V35. First, let's place th…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos