Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel filter on the MV Agusta Brutale 800?

Model: Mvagusta Brutale 800
Part: Fuel filter

Video tutorial

To replace the fuel filter on the MV Agusta Brutale 800, you need to loosen the screws that secure the tank to its housing. Once these screws are loosened, you can proceed to disconnect all the hoses and connectors attached to the tank so that it can be completely removed.

The fuel filter is located at the bottom, and it needs to be freed from its securing screws. Once the old filter has been removed from its seat, you can insert the new one and reassemble the tank.


Posted on 30 December 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a MV Agusta Brutale 800
How to Replace the Air Filter on a MV Agusta Brutale 800
Brutale 800 Below are the instructions on how to remove and replace the air filter of the engine on the MV Agusta Brutale 800 motorcycle. First, place the motorc…
How to Perform a Maintenance Service on the MV Agusta Brutale 800
How to Perform a Maintenance Service on the MV Agusta Brutale 800
Brutale 800 This guide provides instructions for performing a maintenance service on the MV Agusta Brutale 800, including replacing the air filter, spark plugs, …
How to Replace the Coolant Reservoir on an MV Agusta Brutale 800
How to Replace the Coolant Reservoir on an MV Agusta Brutale 800
Brutale 800 This guide explains how to disassemble and replace the coolant reservoir on an MV Agusta Brutale 800. First, place your bike on a stand and begin by …

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos