Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the car radio from the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

If the stock car radio in your first-generation Nissan Juke has stopped working and you want to replace it, but you don't know how to remove it correctly and safely, then all you have to do is follow the following procedure. First of all, enter the car and make sure it is completely turned off, then remove the plastic cover located at the bottom of the radio.

Once you have done that, unscrew the various screws and proceed with the removal of the upper cover surrounding the radio. Unscrew the other screws and pull the radio towards you. Finally, disconnect the electrical cable.


Posted on 21 January 2025 by ScegliAuto


Related tutorials

How to Reset the Radio in a Nissan Juke?
How to Reset the Radio in a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) The video demonstrates how to reset the radio in a Nissan Juke. This model featured in the video has a basic radio without a touchscreen, and it may …
How to Unlock the Radio on a Nissan Juke?
How to Unlock the Radio on a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) You need to unlock the radio on your Nissan Juke when you disconnect or replace the vehicle's battery. Once you reconnect the radio, it will be locke…
Removing the Car Radio on a Nissan Juke
Removing the Car Radio on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Today, we will show you how to replace the car radio on a Nissan Juke. Remove the climate control panel cover to access the screws underneath. Next, …

    Frequently Asked Questions

    • Juke 2010-2019 - How can I retrieve the "pin code" of the car radio of my Nissan Juke? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos