Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the headlight bulb of a Nissan NP300

Model: Nissan Np300 D23 - Years 2014-2024
Part: Light bulb

In this video, we can see how to change the headlight bulb of a Nissan NP300: specifically, it covers how to change the position light bulb. To remove the headlight assembly from its housing, there are only three screws, two of which are easily visible, while the third is in a slightly more hidden position, at the bottom and easier to access from below, perhaps through the wheel arch, near the water tank. Once the headlight assembly is removed, it will be easy to remove the bulb and replace it with a new one, remembering never to touch the transparent bulb with bare hands.

Posted on 25 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to restore the service of the Nissan NP300
How to restore the service of the Nissan NP300
Nissan Np300 (2014-2024 / D23) In today's article, we will show you how to reset the maintenance light on the Nissan NP300. This operation will take less than 1 minute to complete …
How to reset the service light on the Nissan NP300 pick-up?
How to reset the service light on the Nissan NP300 pick-up?
Nissan Np300 (2014-2024 / D23) In this tutorial we can see how to reset the service in the Nissan NP300 pick-up, an extremely simple and quick operation, to be carried out only onc…
Where is the ECU Fuse on the Nissan NP300?
Where is the ECU Fuse on the Nissan NP300?
Nissan Np300 (2014-2024 / D23) The fuse related to the operation of the ECU on a 2018 Nissan NP300 is located inside the fuse box under the front bonnet. Specifically, the box is o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos