Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear spoiler of the Nissan Qashqai J11

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Body

See other generations:
Video tutorial

In this video, we see how to disassemble the rear spoiler of the Nissan Qashqai J11: we open the rear hatch, because we need to remove the inner lining, otherwise we risk breaking several pieces. We start with the handle, removing the screw inside, then the snap clips on the sides of the handle.

This way we can remove the lower part of the lining, and consequently also the upper part - which is all snap-on - where we will find the 10mm bolts under the spoiler: they are both external and inside the panel. This operation is necessary if we have problems with the third brake light or the rear windshield washer.

We remove the connector of the third brake light and then we just have to pull: in fact, there are three snaps that will definitely break (but can be replaced); let's remember to remove the broken pieces, or they will make noise while driving. The YouTuber rightly advises us to secure the wires inside the hatch, in order to minimize the risk of breakage.


Posted on 18 April 2025 by ScegliAuto


Related tutorials

Installing a chrome accessory on the front of a Nissan Qashqai J11
Installing a chrome accessory on the front of a Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, we will see how to add a chrome accessory to the front of a Nissan Qashqai J11. This involves two chrome trims that enhance the front …
How to Remove the Centre Tunnel of a Nissan Qashqai J11
How to Remove the Centre Tunnel of a Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, see how to dismantle the centre tunnel inside the Nissan Qashqai J11: first, remove the side panels, which are simply clipped in. Next…
How to Replace the Gear Knob on the Nissan Qashqai J11
How to Replace the Gear Knob on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) The steps to complete the replacement of the gear knob on your Nissan Qashqai J11 are very simple, and you just need to read the following guide to a…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos