Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Unlock the Immobiliser on a Nissan Micra

Model: Nissan Micra K12 - Years 2002-2010
Part: Checks and maintenance

Learn how to reset the immobiliser indicator on a Nissan Micra. This is a very simple operation: enter the vehicle, turn on the instrument panel (you will see the maintenance light illuminated), and press and hold the button located above the key. While keeping the button pressed, turn off the instrument panel with the key, then turn it back on and wait for the immobiliser to reset. If the reset does not succeed, perform maintenance on your key (as shown in the video). Always remember to make changes to the onboard computer with the vehicle stationary and turned off.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

In the Nissan Micra k12, how do you reset the immobilizer?
In the Nissan Micra k12, how do you reset the immobilizer?
Nissan Micra (2002-2010 / K12) When the immobilizer, unless there is a real failure of components, electronic circuits, boards, cold solder joints etc., which require disassembly a…
How to unlock the Nissan Micra car radio
How to unlock the Nissan Micra car radio
Nissan Micra (2002-2010 / K12) In this short guide, we will see the instructions that will allow us to unlock the Nissan Micra's car radio, in simple and quick steps. First of all,…
How to Open the Tailgate of a Nissan Micra
How to Open the Tailgate of a Nissan Micra
Nissan Micra (2002-2010 / K12) Is the tailgate of your car stuck and won’t open? Let’s see how to open the tailgate of a Nissan Micra. Access the interior of the car (rear); lower …

Other guides you may be interested in

    Frequently Asked Questions

    • Micra 2010-2017 - How often should the Nissan Micra be serviced? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos