Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear door panel of the Nissan King Cab.

Model: Nissan King Cab D21 - Years: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Door trim panel

Video tutorial

Let's see how to remove the rear door panel of a Nissan King Cab, so we can access the speaker or the inside of the door. First, let's unscrew the seatbelt anchor bolt: it is a 14 mm bolt that secures the lower seatbelt anchor.

Above the anchor, there is a plastic cover that surrounds the seatbelt release button; press down on the metal button (the one you press to unbuckle) and at the same time gently pry up on the plastic cover with a screwdriver. At this point, the plastic clip will release; be careful because the metal button might pop out under the tension of the spring.

The panel is only secured by pressure clips, there are no screws, so just pry between the panel and the metal structure of the door at the points of the clips. Once all the clips are released, simply lift the panel upwards, being careful of the electrical connections.


Posted on 5 December 2025 by ScegliAuto


Related tutorials

How to replace the external door handle of the Nissan King Cab
How to replace the external door handle of the Nissan King Cab
Nissan King Cab (1986-1997 / D21) Below we will discover the instructions that will allow us to disassemble and replace the external handle of the front door of the Nissan King Cab. F…
How to Repair or Replace the Front Door Hinge on a Nissan King Cab
How to Repair or Replace the Front Door Hinge on a Nissan King Cab
Nissan King Cab (1986-1997 / D21) In this short guide, see the instructions that will allow you to repair or replace the front door hinge on a Nissan King Cab. First, open the front d…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos