Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find the Fuse Diagrams in a 2017 Nissan Qashqai?

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fuse box

See other generations:
Video tutorial

In the images contained within the attached video, you will find fuses, relays, etc., all contained within the fuse box. It's easy to identify where one of these boxes is located; there are two: one in the engine compartment next to the 12-volt battery that powers the vehicle.

The second is installed between the steering column and the driver's door, and both are protected by a plastic panel, beneath which the fuse diagram is printed.

This document is also available in the owner's manual and, for those who prefer, online in PDF format.


Posted on 3 April 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2021-2026 / J12) The internal fuse box of the Nissan Qashqai is located inside the cabin and is very easy to access. To find it, open the driver's side door and look …
Nissan Qashqai (2014-2022 / J11) This short video tutorial shows the exact location of the fuse boxes and all their respective operating diagrams with amperages, names, and layouts f…
Nissan Qashqai (2006-2014 / J10) Today's instructions will help you locate the positioning of the internal fuse box and how to find its layout for the Nissan Qashqai. First, open the…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the windshield washer pump fuse located in the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai horn fuse located? Read answer

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos