|
Do it yourself
| |||
| ||||
Fuses Location and Diagram for the Nissan Qashqai J10
Model: Nissan Qashqai
J10
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
Let's look at the location of the fuse boxes on the Nissan Qashqai J10: the fuse box inside the cabin is located on the left (on the right in right-hand drive vehicles) at the bottom of the dashboard, under the steering wheel, behind a small cover; in this box, you will find the fuse for the cigarette lighter (which is also a power socket) and it is F7 for the front socket and F19 for the rear socket. There are two more fuse boxes located in the engine compartment, both situated on the right side of the starter battery. The first is positioned closest to the left front headlamp assembly, while the second is near the left front shock absorber strut. Both also contain relays.
Posted on 21 April 2026 by ScegliAuto
Related tutorials
Nissan Qashqai
(2006-2014 /
J10)
In this guide, we will see how to access the internal fuse box of the Nissan Qashqai, finding the diagram and schematic. First of all, we get on boar…
Nissan Qashqai
(2006-2014 /
J10)
This guide shows the location and diagram of the fuse boxes on a Nissan Qashqai J10, first generation. First, locate the internal fuse box, which is …
Nissan Qashqai
(2006-2014 /
J10)
To locate the fuse box containing all the cabin fuses of your Nissan Qashqai J10, follow the few simple steps outlined in this mini guide. First, ope…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Extract the Spare Wheel from a Mercedes Vito
The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.214
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |