Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. : Townstar

How to Reset the Service Light on a Nissan Townstar

Model: Nissan Townstar MK 1 - Years 2024-2026
Part: Service warning light

The Nissan Townstar is a commercial vehicle (derived from the Renault Kangoo / Mercedes Citan) launched in 2021/2022. To reset the service light, turn on the ignition and press the TRIP button on the steering wheel to the right of the display. Hold it until you see the message "Service" or "Oil" or "Maintenance" appear on the display. Keep holding the same button for about 10-15 seconds. A message like "Reset" or "Reset OK" should appear. Release the button when the light goes off, then turn off the ignition and turn it back on to check that the light has disappeared. On the Townstar, the controls vary depending on the trim (Basic Version vs. Pro Version). Check: On the steering wheel (to the right): TRIP button. On the dashboard (to the left of the display): TRIP button. On the wiper stalk (as on some Renaults): a button on the wiper control.

Posted on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Townstar (2024-2026 / MK 1) Without a shadow of a doubt, this is a very original and aesthetically pleasing version of the Nissan Townstar. It is entirely transformed from its o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos