Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace Nissan Qashqai fog light bulbs

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Fog lights
Operation: How to replace Nissan Qashqai fog light bulbs

Below I will explain how to replace the fog lights of your Nissan, recommending however the LED type. In addition to being perfectly interchangeable, the LEDs also offer a more captivating style, intense light and extended duration. We start by parking the car with the handbrake on. We unscrew the three screws located in the front part of the wheel and put them in a safe place. We separate the plastics of the wheel arch and the bumper to be able to access them inside. Locate the fog light headlight. Unscrew the bulb holder and pull it to make it come out of its seat. Proceed to replace the bulb with the new spare. Put everything back together, first the lamp holder, then the three screws.


Posted on 22 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2006-2014 - How much does it cost to replace the fog light switch in the Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where are the fog lights of the Nissan Qashqai located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos