Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J10
- Years 2006-2014 In this video we will see how to go to replace the front fog lamps of the Nissan Qashqai. So first we will go to identify the bulbs: to do this we go to turn the wheels on one side to be able to access the rear part of the front bumper. Then we unscrew the two screws of the fender with a screwdriver and remove the plastic rivets with a flat screwdriver and pull to extract them. Now extract the mudguard and we will have access to the bulb: disconnect the connector by turning it a quarter of a turn counterclockwise and extract the bulb by pulling on the tab!
Posted on 7 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |