Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulbs on a Nissan Qashqai?

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Light bulb

See other generations:
Video tutorial

To replace the fog light bulbs on a Nissan Qashqai, loosen the screws located at the bottom of the bumper on the side corresponding to the bulb to be replaced. You will also need to loosen the screws securing the inner wheel arch panel; this will allow access to the back of the bulb, which can then be removed from its housing and disconnected from the connector.

The new bulb can then be inserted and connected to the connector. After the replacement, reattach the wheel arch and the bottom of the bumper.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Removing the Headlight Bulbs on a Nissan Qashqai
Removing the Headlight Bulbs on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Need to remove the front headlight bulbs on a Nissan Qashqai? Let’s remove and replace the bulbs. Open the bonnet of the engine compartment, and usin…
Replace Headlight Bulbs on Nissan Qashqai
Replace Headlight Bulbs on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Are the bulbs damaged on your Nissan Qashqai? Here’s how to remove them from the front headlamp. Lift the front bonnet by pulling the lever located a…
How to Replace the Lights in the Nissan Qashqai
How to Replace the Lights in the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) In today's video, you will learn how to replace the interior lights and the number plate lights in the second series Nissan Qashqai. Often, bulbs are…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos