Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulbs on the Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fog lights

See other generations:
Video tutorial

In a few simple steps, learn how to replace the front fog light bulbs on the Nissan Qashqai. First, move to the front of the vehicle and remove all the plastic clips and screws found on the lower panel of the bumper, thus accessing the interior of the fog lights.

Then disconnect the electrical connector to remove the fog light bulb, as shown in the video. At this point, install the new bulb of the correct type with the same fitting; check its operation before reattaching the lower plastic panel!


Updated on 27 October 2026 by ScegliAuto


Related tutorials

Removing Fog Light Bulbs on a Nissan Qashqai
Removing Fog Light Bulbs on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Have the fog light bulbs blown? Here’s how to replace them on a Nissan Qashqai. To remove the bulbs, you need to take off the wheel arch liner above …
Replacing the Front Fog Light Bulbs on a Nissan Qashqai
Replacing the Front Fog Light Bulbs on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) In this video, you will learn how to replace the front fog light bulbs on a Nissan Qashqai. First, locate the bulbs: to do this, turn the wheels to o…
How to Replace the Fog Light on a Nissan Qashqai
How to Replace the Fog Light on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) In this guide, you will learn how to replace the fog light on a Nissan Qashqai. First, remove the plastic cover from the bumper where the front wheel…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos