Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the fog lamp on a Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Fog lights
Operation: How to replace the fog lamp on a Nissan Qashqai

In this video we will see how to replace the fog light of a Nissan Qashqai. First of all it is necessary to remove the plastic bumper where the front wheel is positioned, then we will have a view of the whole fog light compartment, disconnect the first connector (black plastic tube), unhook the supports of the fog light block, remove the chrome frame of the fog light the car from the front and slide out all the fog light support towards you. Now simply do the reverse process, then insert the new bulb into the holder, insert it back into the station, re-attach the supports and connectors.


Posted on 27 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How much does it cost to replace the fog light switch in the Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where are the fog lights of the Nissan Qashqai located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos