Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the fog light bulb nissan qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Fog lights
Operation: How to replace the fog light bulb nissan qashqai

Let's see how to replace the light bulb on Nissan Qashqai. Let's get ready to disassemble the plastic stone protector on the front wheel with a special screwdriver, we arrive at the side fog light placed in the bumper. After removing the lamp holder, we remove the damaged bulb and fit a new one (same size and voltage). We reassemble the plastic covering of the stone guard of the wheel with the attached rivets or screws. We test the correct functioning of the lights. We carry out the replacement on both fog lights, to have the same type of lighting in the front.


Posted on 21 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How much does it cost to replace the fog light switch in the Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where are the fog lights of the Nissan Qashqai located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos