Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Nissan Navara?

Model: Nissan Navara D40 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

From the instrument panel of the Nissan Navara, you can completely clear the Service light by holding down the button located under the speedometer while the ignition is off. Continue to hold the button down, insert the ignition key into the lock, and turn it to power on the display: at this point, you can keep holding the button until the light is completely cleared.

You can then turn off the ignition and turn it back on to verify that the light has been fully cleared.


Posted on 21 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Nissan Navara D40
How to Reset the Service Light on a Nissan Navara D40
Nissan Navara (2005-2015 / D40) This video shows the procedure to reset the maintenance light on a Nissan Navara D40. This procedure is very simple and quick, taking less than a min…
How to reset the Service light on the Nissan Navara?
How to reset the Service light on the Nissan Navara?
Nissan Navara (2005-2015 / D40) To reset the Service light on the Nissan Navara, turn on the ignition by inserting the key into the ignition switch. Once the dashboard lights up, pr…
How to Reset the Service Light on a 2010 Nissan Navara
How to Reset the Service Light on a 2010 Nissan Navara
Nissan Navara (2005-2015 / D40) To reset the service light on a 2010 Nissan Navara, follow these steps: -turn on the instrument cluster of the Nissan Navara; -simultaneously press t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos