Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Nissan Navara D40

Model: Nissan Navara D40 - Years 2005-2015
Part: Checks and maintenance

This video shows the procedure to reset the maintenance light on a Nissan Navara D40. This procedure is very simple and quick, taking less than a minute to complete. To perform the reset, first, turn on the ignition, then press the two buttons located on either side of the instrument cluster for 10 seconds until the service light disappears, as the reset will have occurred after 10 seconds. This procedure is very straightforward and is useful when performing a service, but the light remains on.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Navara (2005-2015 / D40) This video shows how to reset the ECU of the Nissan Navara D40. To reset the ECU, start the ignition by turning the key to ON, then wait for 3 second…
Nissan Navara (2005-2015 / D40) Thanks to this useful video tutorial, you can see how to reset the oil change light on a Nissan Navara, model D40, produced from 2005 to 2015. The pr…
Nissan Navara (2005-2015 / D40) In this video, we see how to reset the low oil level indicator on a Nissan Navara D40 version; this message appears after maintenance or an oil chang…

    Frequently Asked Questions

    • Navara 2005-2015 - Where is the jack of a Nissan Navara located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos