Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Switch Button in a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Power window switch

See other generations:
Video tutorial

To replace the window switch button in a Nissan Qashqai, open the door and use a plastic lever to gently lift the control panel from the door trim. Detach the panel from the clips and remove it from its seat.

Press the tabs of the electrical connectors and disconnect them from the module. At this point, separate the button group from the plastic frame by releasing the clips that hold it. Remove the old button and install the new one in the same position, ensuring all tabs are correctly locked.

Reconnect the electrical connectors and reinsert the control panel into the door, pressing until the clips snap into place. Finally, operate the window and check the correct functioning of the new switch.


Posted on 25 September 2026 by ScegliAuto


Related tutorials

How to Repair or Replace the Window Regulator Motor on the Nissan Qashqai
How to Repair or Replace the Window Regulator Motor on the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today's information will assist you in the process of replacing or repairing the mechanism and window regulator motor of the Nissan Qashqai. First, o…
Removing the Door Panel with Window Motor on a Nissan Qashqai
Removing the Door Panel with Window Motor on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) How to remove the door panel with the window motor on a Nissan Qashqai? Before starting the disassembly, disconnect the battery terminals located in …
How to Reset the Electric Window Memory on Nissan Qashqai
How to Reset the Electric Window Memory on Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) In this video, see how to reset the automatic window memory on a Nissan Qashqai J11 version. This may happen if you have performed some minor electri…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos