Do it yourself
Frequently asked questions about cars and motorcycles

How to Repair or Replace the Window Regulator Motor on the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

Today's information will assist you in the process of replacing or repairing the mechanism and window regulator motor of the Nissan Qashqai. First, open the front door and begin to dismantle and remove the door panel by taking off the plastic cover of the handle and the window switch; then, unscrew the fixing screws and disconnect the electrical connector.

At this point, disconnect the side glass from the mechanism by unscrewing the fixing screws and removing the window regulator motor; replace it with a new one or carry out the repair, following the video tutorial to the end!


Updated on 25 October 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) Let's see how to replace the window lifter of the Nissan Qashqai J10: unfortunately, the problem arises from the fact that from the driver's control …
Nissan Qashqai (2006-2014 / J10) In this video, see how to repair the air conditioning and heater fan motor on a Nissan Qashqai J10: if the motor with the fan is not working, locate …
Nissan Qashqai (2014-2022 / J11) To replace the rear wiper blade on a Nissan Qashqai, start by gently lifting the rear wiper arm away from the rear screen. You may feel slight resist…

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the reverse switch of a Nissan Qashqai located? Read answer
    • Qashqai 2006-2014 - How to remove the ignition lock of a Nissan Qashqai? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos