Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Air Conditioning Fan Motor on a Nissan Qashqai J10

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

In this video, see how to repair the air conditioning and heater fan motor on a Nissan Qashqai J10: if the motor with the fan is not working, locate it in the cabin, under the dashboard on the driver's side (left-hand drive), deeply embedded within the dashboard.

Before removing it, measure the voltage on the wire; if there is voltage, it means the motor is faulty and needs replacing.

Before installation, check if it works, then remove the damaged part and fit the new one in its place: you can find the new part, for example, on Amazon with code B08RF1MG29 for £38.00, plus £17.00 delivery.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How do you remove the heater fan of the Nissan Qashqai?
How do you remove the heater fan of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) The position of the cabin heating fan, in this specific case we are talking about the Nissan Qashqai j10, is not very convenient to reach. In fact, d…
Cabin Fan Resistor Replacement on Nissan Qashqai 1
Cabin Fan Resistor Replacement on Nissan Qashqai 1
Nissan Qashqai (2006-2014 / J10) In this video tutorial, learn how to remove and replace the cabin fan resistor on a Nissan Qashqai Mk1 in simple steps. First, get inside the vehicle…
How to Remove the Cabin Fan in a Nissan Qashqai?
How to Remove the Cabin Fan in a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) In this tutorial, you will see the location of the cabin fan in the Nissan Qashqai J10 and how to remove it, a very simple operation. It is located a…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos