Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the EGR Valve on a Nissan Primastar 2.0

Model: Nissan Primastar - Years 2001-2016
Part: EGR valve

Learn how to remove the EGR valve on a Nissan Primastar, with an important warning: this type of vehicle has two types of EGR valves with different electrical connectors; check the PIN number of your valve, or you won't be able to fit it! The YouTuber demonstrates how to access the EGR valve without removing the bumper, by working from the top of the engine bay. Remove the boost pipe by loosening the clips and disconnecting the sensor, take out the airbox, remove another intake pipe, and unscrew the bolts securing a support frame. Now, remove the throttle body (take the opportunity to clean the surfaces and ducts). You have finally reached the EGR valve: remove the metal pipe leading to the valve, disconnect the electrical connector, and you will see the valve is dirty with sludge, but also has moisture and traces of coolant; indeed, the EGR radiator is leaking. Therefore, it is not enough to change the valve; you will also need to replace the radiator, which will require removing the coolant pipes and losing most of the coolant, which will need to be replaced.

Posted on 26 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Primastar (2001-2016 / MK 1) In this tutorial we can see how to replace the cabin filter in the Nissan Primastar van, an extremely simple and quick operation to be carried out ev…
Nissan Primastar (2001-2016 / MK 1) In this tutorial we can see how to reset the service in the Nissan Primastar van, an extremely simple and quick operation, to be carried out only onc…
Nissan Primastar (2001-2016 / MK 1) As shown in this tutorial, resetting the service light on the Nissan Primastar van is a very simple and quick operation. Before proceeding, ensure yo…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos